.png){kind=logo}
Configuring Your 8450 as an InformaCast IP Speaker
Enable your 8450 as an InformaCast IP Speaker so it can register as an InformaCast SIP endpoint. This allows it to initiate and receive SIP calls and receive messages through InformaCast.
To configure 8450 as an InformaCast IP Speaker:
Log in to your device’s web interface.
Go to Advanced Settings → Admin → InformaCast IP Speaker section and configure the following:
.png)
InformaCast IP Speaker Support: Select Enabled.
Configuration Mode: Select a configuration mode.
Auto: Find the location of the configuration file using DNS SRV, SLP, and/or via DHCP and TFTP.
Manual: Set the configuration file location manually.
Direct: Register the list of static server addresses directly, bypassing the Configuration File Server.
Configuration Retry Interval: Set the amount of time to wait before attempting to obtain configuration information after failure.
SIP Support: Set to Enabled.
This allows the Algo device to register with InformaCast SIP Intercom services.
Select Save.