--- title: "Zoom Configuration with Algo IP Devices" slug: "zoom-configuration" updated: 2026-07-27T21:04:37Z published: 2026-07-27T21:04:37Z canonical: "docs.algosolutions.com/zoom-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.algosolutions.com/llms.txt > Use this file to discover all available pages before exploring further. # Zoom Configuration with Algo IP Devices Algo IP endpoints can register to a Zoom Phone as third-party SIP endpoints for paging, ringing, and emergency alerting. This document provides instructions on how to add your Algo endpoints to the Zoom web portal. For more information on Zoom Phone, see the [Zoom Phone System Support documentation](https://support.zoom.com/hc/en/category?id=kb_category&kb_category=5b8432168720391089a37408dabb35b0). > [!NOTE] > **Note:** > > The following endpoints cannot register to Zoom, as TLS/SRTP support is not available: > > - 8180 IP Audio Alerter (G1) > - 8028 IP Doorphone (G1) > - 8128 IP Visual Alerter (G1) > - 8061 IP Relay Controller > - 8036 IP Multimedia Intercom > - Limited support (audio only): 8039 IP Video Mullion Intercom > > For more details on supported Algo devices, see [Zoom Phone Certified Hardware](https://support.zoom.com/hc/en/article?id=zm_kb&sysparm_article=KB0060242#h_01efb6f3-7d25-4d36-a8b5-486d45754037). ## Requirements - Access to Algo’s web interface - Firmware 3.2.3 or higher - Device certificate installed - See the **System → About** tab on the Algo device web interface - Any Algo endpoint shipped in 2019 or later will have the certificate installed. If the certificate is not installed, please contact Algo’s support team - Access to the Zoom Portal ## Configuration Steps ### 1. Add a Common Area 1. Sign in to the [Zoom web portal](https://zoom.us/signin#/login). 2. In the left navigation, go to **Admin → Phone System Management → Users & Rooms**. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(160).png) 3. Click on the **Common Area Phones** tab. 4. Click **Add** and enter the following information: ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(161).png) 1. **Display Name**: Enter a display name to identify the common area phone. 2. **Extension Number**: Enter an extension number to assign it to the device. 3. **Package**: Select your desired package. 4. **Country/Region**: Select your country. 5. **Time/Zone**: Select your time zone. 5. Click **Save**. ### 2. Add a Desk Phone 1. After adding a common area, use the left navigation to open **Admin → Phone System Management → Phones & Devices**. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(162).png) 2. Click **Add** and enter the following information: ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(164).png) 1. **Display Name**: Enter a display name to identify the device. 2. **Description (Optional)**: Enter a description to help you identify the device or its location. 3. **MAC Address**: Enter the 12-digit MAC address of the Algo Endpoint. The MAC can be found on the product label or in the Algo Web Interface under Status. 4. **Device Type**: Select **Algo**. (If you do not have **Algo** as an option, contact your Zoom sales representative. 5. **Model**: Select “algo-sip-based-device”. 6. **Assigned To**: Select the recently created Common Area Phone or a User in the system. 3. Click **Save.** ### 3. Provision the Algo Device 1. On the page for the newly created desk phone, click **Actions → Provision** at the bottom of the screen and follow the instructions. You will need to open the web interface for the device you are configuring. After opening the web interface, navigate to the tab **Advanced Settings → Provisioning** to enter the relevant details. | ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(165).png) | ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(167).png) | | --- | --- | 2. Once the steps are complete, click **Next**. 3. Click **Check** to verify the endpoint was provisioned and registered successfully to the Zoom Phone. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(168).png) The registration status may also be verified from the Algo’s device web interface. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(169).png) ## Adding Additional Extensions 1. Open the device page and click on the tab **Extension Assignment**. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(170).png) 2. In the top-left corner, click **Add**. 3. In the new window, select the **Users** and **Common Areas** to apply the extension under each tab. 4. Once complete, click **Next**. 5. Choose the assignment type and port number for the extension. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(171).png) 6. Click **Save**. ## Cloud Failover Algo device have partial support for cloud failover with Zoom Phones. Failover support allows Zoom Phone devices to register automatically to an alternate Zoom Phone data center when the primary data center becomes unavailable through planned or unplanned downtime. During the failover process, the devices may experience a brief service interruption and missed call notifications. Devices will initiate a failback process and return to the primary data center once the service is resumed. The supported cloud failover features supported by Algo IP endpoints include: - Admin password - Assisted provisioning for most devices. To configure, open the web interface and navigate to the tab **Advanced Settings → Advanced SIP**, then scroll to **Zoom Phone Local Survivability** to enable as needed. ![](https://cdn.document360.io/f6f5e62d-d280-487f-9da7-5926ffd53b5f/Images/Documentation/image(177).png) | Zoom Phone Local Survivability | | --- | | Local Survivability | Enable to re-register with local ZPLS Node if connection to Zoom fails. This allows sites to maintain a subset of Zoom Phone features even if connectivity to the Zoom Phone cloud is lost. | | Survivability Proxy | The IP address or domain name of the local ZPLS node. | ## Troubleshooting Status Failures If provisioning of the Zoom Phone is not successful, the SIP Registration status on the Status page of the web interface may say one of the follow: - **Assisted Provisioning Failed** - **Meaning**: The Algo endpoint failed the get the SIP credentials from Zoom Phone during the provisioning process. - **Troubleshooting**: Ensure the manufacturer device certificate is installed. This information is available under the System  About tab. If the status is “Not Installed”, please contact Algo Support ([support@algosolutions.com](mailto:support@algosolutions.com)). - **SIP Registration Status = “Rejected by Server”** - **Meaning**: The server received register request from the endpoint and responds with an unauthorized message. - **Troubleshooting**: Ensure the SIP credentials (extension, authentication ID, password) are correct. Under Basic Settings > SIP, check the Authentication Password by clicking the blue circular arrows. If the Password is not what it should be, the web browser is probably auto filling the password field. If so, any change on a page containing a password could be filled in with an undesired string. - **SIP Registration Status = “No reply from server”** - **Meaning**: The device is not able to communicate across the network to the phone server. - **Troubleshooting**: - Under **Basic Settings → SIP** check that SIP Domain (Proxy Server), is filled out correctly with the address of your server and port number. - Ensure the firewall (if present) is not blocking the incoming packets from the server. - Under **Advanced Settings → Advanced SIP** ensure SIP Transportation Method is set to TLS.